Best picks

8 Best Battery Backups for Security Camera Systems (November 2026)

Updated on · By the Get Security Camera team

The best battery backup for security camera system include the CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup for large NVR and camera systems, the APC BE600M1 UPS Battery Backup & Surge for compact home offices, and the APC BE425M UPS Battery Backup and Surge for routers and modems only.

On this page (10 sections)
  1. The best battery backups for security camera systems compared
  2. Side-by-side comparison of battery backup options
  3. How we compared these battery backups
  4. How much capacity does a security camera system battery backup need?
  5. Which devices should use battery backup outlets?
  6. Sine wave, simulated sine wave and pure sine wave: what matters?
  7. Lead-acid or lithium: which battery type lasts longer?
  8. Battery backup or battery cameras: which do you need?
  9. How should you set up and care for a UPS?
  10. Verdict: which battery backup should you buy?

The best battery backup for security camera system use is the CyberPower CP1500PFCLCD, because it pairs 1500VA/1000W capacity with sine wave output and 12 outlets. That mix suits a recorder, network gear and multiple wired cameras on one unit.

A UPS, or uninterruptible power supply, bridges the gap when utility power fails. It gives your recorder time to keep writing and your router time to stay online.

It does not replace a battery powered camera, which runs from its own cell. Our guide to What Is a Battery Powered Security Camera? explains that different setup.

Start by listing what must stay on. Most readers protect the NVR first, then the router and modem, then cameras.

Our picks at a glance

  1. 1 CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup
    Best for large NVR and camera systems

    CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup

    9.7/10 our score

    See it on Amazon
  2. 2 APC BE600M1 UPS Battery Backup & Surge
    Best for compact home offices

    APC BE600M1 UPS Battery Backup & Surge

    9.6/10 our score

    See it on Amazon
  3. 3 APC BE425M UPS Battery Backup and Surge
    Best for routers and modems only

    APC BE425M UPS Battery Backup and Surge

    9.6/10 our score

    See it on Amazon
  1. 4CyberPower EC850LCD Ecologic UPS Battery BackupCheck it
  2. 5pemacom HD 1080P Dual Wireless Backup CameraCheck it
  3. 6GOLDENMATE 1000VA/800W Lithium UPS Battery BackupCheck it
  4. 7VOONOA Wireless Magnetic Backup Camera

    VOONOA Wireless Magnetic Backup Camera

    Best for truck and trailer views
    Check it
  5. 8CyberPower ST425 Standby UPS Battery Backup

    CyberPower ST425 Standby UPS Battery Backup

    Best for a single router setup
    Check it

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared capacity, outlet split, output type and runtime figures for each pick.

The best battery backups for security camera systems compared

The CyberPower CP1500PFCLCD leads for full systems, while the APC models suit smaller loads. The GOLDENMATE adds lithium battery life, and the two vehicle cameras solve travel use instead.

1

CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup: Best for large NVR and camera systems

CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup, battery backup for security camera system
9.7/10Our score
  • 1500VA/1000W PFC sine wave output
  • 12 NEMA 5-15R outlets
  • Color LCD panel
  • Automatic voltage regulation

The largest UPS here suits a full recorder, networking gear and several cameras on one unit.

See it on Amazon

Pros

  • Highest capacity in this group
  • Sine wave output
  • Color LCD shows battery and power status

Cons

  • Heaviest unit here
  • Takes more floor space

This CyberPower suits a home with an NVR, router, modem and several wired cameras. Its 1500VA/1000W rating is the largest here, so it has the most headroom for a full load.

Sine wave output matters for sensitive power supplies. CyberPower says this output suits active PFC and conventional supplies, which covers many recorders and network devices.

You get 12 NEMA 5-15R outlets, with 6 on battery backup and surge protection and 6 on surge protection only. That split helps you put the NVR and router on backup and less critical gear on surge only.

The color LCD panel shows battery and power conditions at a glance. The screen tilts up to 22 degrees, which helps when the unit sits low under a desk.

Automatic voltage regulation corrects minor fluctuations without switching to battery. That can preserve battery life in areas with frequent small sags.

The trade-off is size and weight at 24.9 pounds and 14 x 3.9 x 11 inches. Choose it for a full system, not for a single router.

CyberPower CP1500PFCLCD PFC Sinewave UPS Battery BackupCheck it on Amazon
2

APC BE600M1 UPS Battery Backup & Surge: Best for compact home offices

APC BE600M1 UPS Battery Backup & Surge, battery backup for security camera system
9.6/10Our score
  • 600VA/330W backup
  • 23 minutes at 100W load
  • 5 battery backup outlets and 2 surge-only outlets
  • USB charging port

A compact APC unit that keeps a router, modem and a few cameras connected during short outages.

See it on Amazon

Pros

  • Compact size
  • Clear runtime figure at 100W
  • Replaceable battery

Cons

  • Less capacity than the CyberPower CP1500PFCLCD
  • Runtime drops as load rises

The APC BE600M1 suits a compact desk or network shelf with a router, modem and a few cameras. Its 600VA/330W capacity is a step down from the top pick, but it is easier to place.

APC gives a clear runtime figure of 23 minutes at a 100W load. That helps you plan for short outages and safe shutdown, rather than guessing from the VA rating alone.

It has 5 outlets with battery backup and surge protection, plus 2 surge-only outlets. Put the router and NVR on backup outlets and move printers or chargers to surge only.

A built-in 1.5A USB port keeps a phone charging during an outage. That small feature can matter when the lights go out.

The battery is user-replaceable, with APC replacement battery APCRBC154 sold separately. That can extend the life of the unit without replacing the whole UPS.

The trade-off is shorter runtime as you add load. It is best for a modest system, not a large multi-camera recorder plus extra gear.

APC BE600M1 UPS Battery Backup & SurgeCheck it on Amazon
3

APC BE425M UPS Battery Backup and Surge: Best for routers and modems only

APC BE425M UPS Battery Backup and Surge, battery backup for security camera system
9.6/10Our score
  • 425VA/255W backup
  • Up to 15 minutes at 100W load
  • 6 outlets with 4 battery backup
  • Wall-mountable design

A small APC unit for low-power network gear when a large UPS would be wasted space.

See it on Amazon

Pros

  • Small and wall-mountable
  • Suits routers and modems
  • Surge protection on all outlets

Cons

  • Lowest UPS capacity here
  • Not suited to an NVR plus many cameras

The APC BE425M suits a router and modem only, or a very small camera setup with low power draw. Its 425VA/255W rating is the smallest UPS capacity in this group.

APC states up to 15 minutes of runtime when powering a 100W load. That is enough for short outages and for keeping a connection alive while you check status.

It has 6 outlets, with 4 providing battery backup and surge protection and 2 providing surge protection only. That layout still lets you prioritize network gear.

The compact design can sit on a floor or mount on a wall. That helps in apartments, dorm rooms and small workspaces where desk space is tight.

An LED status display and audible alarms show power conditions. A building wiring fault indicator also alerts you to potential wall circuit problems.

The trade-off is clear. This is not the pick for an NVR plus many cameras.

Choose it when your main risk is losing internet, not losing recording for hours.

APC BE425M UPS Battery Backup and SurgeCheck it on Amazon
4

CyberPower EC850LCD Ecologic UPS Battery Backup: Best for energy saving setups

CyberPower EC850LCD Ecologic UPS Battery Backup, battery backup for security camera system
9.3/10Our score
  • 850VA/510W backup
  • 12 NEMA 5-15R outlets
  • Multifunction LCD panel
  • ECO mode outlets

A mid-size CyberPower unit with many outlets and ECO mode for peripheral gear.

See it on Amazon

Pros

  • 12 outlets
  • ECO mode can cut idle power use
  • LCD status panel

Cons

  • Simulated sine wave output
  • ECO mode needs a USB connection

The CyberPower EC850LCD suits a home office that also protects a security recorder. Its 850VA/510W capacity sits between the small APC units and the largest CyberPower pick.

It has 12 NEMA 5-15R outlets, with 6 on battery backup and surge protection and 6 on surge protection only. That many outlets can reduce the need for a separate power strip.

Three of the surge outlets are ECO controlled. When it detects a computer is off or in sleep mode, it can turn off power to peripherals on those outlets.

A multifunction LCD panel shows battery and power conditions. That makes it easier to check charge level and load without guessing.

The output is simulated sine wave, not pure sine wave. That is fine for many devices, but check your recorder and power supplies if you need sine wave output.

The trade-off is that ECO mode needs a USB connection to work as described. Choose this if outlet count and idle power savings matter more than pure sine wave output.

CyberPower EC850LCD Ecologic UPS Battery BackupCheck it on Amazon
5

pemacom HD 1080P Dual Wireless Backup Camera: Best for trailers and RVs

pemacom HD 1080P Dual Wireless Backup Camera, battery backup for security camera system
9.2/10Our score
  • 15200mAh battery with solar trickle charging
  • 1080P HD camera with 170 degree view
  • 7.2 inch split-screen monitor
  • Magnetic mount with no drilling

A battery camera system for vehicles and trailers, not a home NVR backup.

See it on Amazon

Pros

  • Dual cameras in the box
  • Works without vehicle wiring
  • Solar trickle charging

Cons

  • Vehicle use, not home security power
  • Designed for towing and reversing

The pemacom system suits RV owners, campers and trailer users who need a rear view without wiring. It is not a home UPS for an NVR, and that distinction matters.

It includes 2 solar magnetic cameras, a 7.2 inch split-screen monitor and a suction cup mount. The cameras use a 15200mAh battery with solar trickle charging.

pemacom says the system gives up to 26 hours of continuous use on a full charge. With normal daily use, it states support for 2 to 3 day trips without USB-C charging.

The 1080P cameras have a 170 degree viewing angle and dual IR LEDs with up to 30ft night visibility. Loop recording captures activity while parked.

Magnetic mounts install in about 1 second with no drilling, cables or tools listed for the camera. That makes it easy to move between vehicles.

The trade-off is use case. Choose it for towing, hitch alignment and campsite parking.

Choose a UPS for a wired home security camera system.

pemacom HD 1080P Dual Wireless Backup CameraCheck it on Amazon
6

GOLDENMATE 1000VA/800W Lithium UPS Battery Backup: Best for long battery life

GOLDENMATE 1000VA/800W Lithium UPS Battery Backup, battery backup for security camera system
9.0/10Our score
  • 1000VA/800W pure sine wave
  • LiFePO4 battery with 5000 charge cycles
  • 8 NEMA 5-15P outlets
  • Intelligent LCD panel

A lithium UPS with pure sine wave output and long stated battery life for recorder gear.

See it on Amazon

Pros

  • Pure sine wave output
  • Long stated battery lifespan
  • 8 battery backup outlets

Cons

  • Cooling fan can activate under heavy use
  • Needs 90 to 140V AC input

The GOLDENMATE suits buyers who want longer battery life and pure sine wave output. Its 1000VA/800W rating is strong for an NVR, router and cameras.

It uses a Lithium Iron Phosphate battery pack. GOLDENMATE states a lifespan of over 10 years and more than 5000 charge cycles.

That chemistry contrasts with lead-acid units in this group, which typically need earlier battery replacement. GOLDENMATE says total cost of ownership is more than 40% lower than traditional lead-acid solutions.

It has eight NEMA 5-15P outlets with surge protection and battery backup. A built-in Battery Management System works with the cooling system.

An intelligent LCD panel shows real-time battery and power conditions. The unit also monitors battery voltage and addresses outages, surges and voltage fluctuations.

The trade-off is the cooling fan, which can activate when the BMS detects heavy battery usage. GOLDENMATE says fan noise stays below 50 dB.

GOLDENMATE 1000VA/800W Lithium UPS Battery BackupCheck it on Amazon
7

VOONOA Wireless Magnetic Backup Camera: Best for truck and trailer views

VOONOA Wireless Magnetic Backup Camera, battery backup for security camera system
8.8/10Our score
  • 15000mAh battery powered camera
  • 7 inch 1080P monitor
  • Solar panel support
  • Magnetic mount

A wireless vehicle camera that solves a different job from a home UPS.

See it on Amazon

Pros

  • No complex vehicle wiring
  • Strong magnetic mount
  • Solar panel extends use

Cons

  • Vehicle camera, not an NVR UPS
  • Monitor shows up to 2 cameras

The VOONOA system suits truck, trailer and RV use where a wired camera is not practical. It is not a battery backup for a home NVR.

It includes a wireless magnetic backup camera and a 7 inch 1080P monitor. The camera has a 15000mAh battery and 6 strong magnetic magnets.

A solar panel can supplement power on sunny days and extend battery use. VOONOA says the camera enables continuous operation for 24 hours with that setup.

The system connects wirelessly with a range of up to 120ft in confined environments. The monitor can view images from up to 2 cameras.

Installation is plug and play with no complex power wiring on the vehicle. That makes it a simple DIY option for rear view and hitch alignment.

The trade-off is scope. Choose it for a vehicle or trailer.

Choose a UPS from this list for wired cameras, a recorder and network gear at home.

VOONOA Wireless Magnetic Backup CameraCheck it on Amazon
8

CyberPower ST425 Standby UPS Battery Backup: Best for a single router setup

CyberPower ST425 Standby UPS Battery Backup, battery backup for security camera system
8.4/10Our score
  • 425VA/260W standby UPS
  • 8 NEMA 5-15R outlets
  • 4 battery backup and 4 surge-only outlets
  • Compact plastic design

The lightest UPS here for a broadband router and a small work-from-home setup.

See it on Amazon

Pros

  • Lightest unit here
  • 8 outlets for the size
  • GreenPower design

Cons

  • Simulated sine wave output
  • Small capacity for full systems

The CyberPower ST425 suits a single router, modem or small home office setup. Its 425VA/260W rating matches the smallest APC unit in capacity.

It is the lightest UPS here at 3.8 pounds. That makes it easier to move, mount in a small space or place under a desk.

It has 8 NEMA 5-15R outlets, with 4 on battery backup and surge protection and 4 on surge protection only. The outlet count is high for its size.

An LED status light shows power-on and wiring fault conditions. Transformer-spaced outlets help with bulky plugs.

CyberPower uses simulated sine wave output in standby topology. That is adequate for many home office devices and broadband routers.

The trade-off is limited capacity for a full security system. It suits network gear best, not an NVR plus several cameras.

CyberPower ST425 Standby UPS Battery BackupCheck it on Amazon

Side-by-side comparison of battery backup options

The table below makes the capacity and outlet differences easy to scan. Use it to match a UPS to your total load before you read the buying advice.

ProductBest forCapacityOutletsWeightOur score
CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backuplarge NVR and camera systems1500VA/1000W12 NEMA 5-15R24.9 pounds9.7
APC BE600M1 UPS Battery Backup & Surgecompact home offices600VA/330W7.5 pounds9.6
APC BE425M UPS Battery Backup and Surgerouters and modems only425VA/255W5.7 pounds9.6
CyberPower EC850LCD Ecologic UPS Battery Backupenergy saving setups850VA/510W12 NEMA 5-15R7.7 pounds9.3
pemacom HD 1080P Dual Wireless Backup Cameratrailers and RVs6.2 pounds9.2
GOLDENMATE 1000VA/800W Lithium UPS Battery Backuplong battery life1000VA/800W5.6 kg9.0
VOONOA Wireless Magnetic Backup Cameratruck and trailer views4.2 pounds8.8
CyberPower ST425 Standby UPS Battery Backupa single router setup425VA/260W8 NEMA 5-15R3.8 pounds8.4

For a wired home system, capacity and runtime matter most. For vehicle cameras, battery size, mount type and screen size matter more.

How we compared these battery backups

We compared VA and watt ratings first, because they set the upper limit for your load. We then checked how many outlets provide battery backup, not just surge protection.

We also looked at output type, since sine wave or pure sine wave units suit sensitive power supplies. Runtime figures at a stated load helped separate short-outage units from larger ones.

Battery chemistry mattered too, as lithium and lead-acid designs differ in stated lifespan and replacement needs. Finally, we checked size, weight and outlet layout for real placement in a network closet or desk area.

How much capacity does a security camera system battery backup need?

An NVR plus router and modem often fits in the 600VA to 1000VA range, while larger systems need 1500VA. Add up watts for every device you want on battery backup.

Leave headroom above that total. A UPS running near its limit will give less runtime and may alarm under load.

What to add up

Add the NVR, router, modem, switch if you have one, and each wired camera adapter. Cameras vary widely, so use the adapter ratings for your models.

Our best security camera power supply guide helps you check adapter needs before you size a UPS.

Why VA and watts both matter

VA is the apparent power rating, while watts is the real power limit. Use the lower effective limit when you compare a load to a UPS.

A unit rated 1000VA/800W cannot supply 1000W of real load. Stay below both ratings to keep runtime realistic.

Which devices should use battery backup outlets?

Put the NVR, router and modem on battery backup outlets first. Those three keep recording and remote access alive the longest.

Add cameras to battery backup only if capacity remains. Surge-only outlets still protect against spikes, but they give no runtime during an outage.

What to move to surge only

Move printers, chargers and non-essential peripherals to surge-only outlets. That choice preserves runtime for recording gear.

Larger picks like the CyberPower CP1500PFCLCD give you more battery outlets to spread the load. Smaller units force stricter choices.

How to plan the outlet split

List devices in priority order, then fill battery outlets from the top down. Stop when the total watts approach the UPS limit.

If you run out of battery outlets, consider a larger UPS. Our broader best battery backup for security cameras guide covers more sizing patterns.

Sine wave, simulated sine wave and pure sine wave: what matters?

Sine wave and pure sine wave output suit sensitive power supplies best. Simulated sine wave works for many simpler devices.

An NVR and network gear may have power supplies that prefer clean sine wave output. Check your equipment needs before you choose the cheapest standby unit.

When simulated sine wave is fine

Routers, modems and many small adapters run fine on simulated sine wave output. That is why smaller standby units remain popular for network gear.

For a modest setup, a simulated sine wave UPS can be a practical choice. Just confirm compatibility for your recorder in particular.

When to step up to pure sine wave

Step up when your NVR, computer or power supplies need active PFC compatibility. The CyberPower CP1500PFCLCD uses sine wave output for that use.

The GOLDENMATE also provides pure sine wave output with lithium battery life. Either option suits buyers who want cleaner output for the full system.

Lead-acid or lithium: which battery type lasts longer?

Lithium Iron Phosphate batteries generally state longer life and more charge cycles. GOLDENMATE states over 10 years and more than 5000 cycles for its LiFePO4 pack.

Lead-acid UPS units are common and often lower cost up front. Their batteries usually need replacement sooner, even if the UPS body lasts longer.

What to check after a few years

Check runtime at a known load once a year. If runtime drops sharply, the battery may need replacement.

Some APC models use user-replaceable batteries, which can lower long-term cost. That feature is worth noting for a unit you plan to keep for years.

Which type fits your home?

Choose lithium if you want fewer battery replacements and pure sine wave output. Choose lead-acid if budget matters more and you accept maintenance.

Either type works for short outages. The right choice depends on how long you plan to keep the UPS and how often local power fails.

Battery backup or battery cameras: which do you need?

A UPS protects wired equipment that stops when wall power fails. Battery cameras run from their own rechargeable cells and do not need a UPS.

A hybrid setup can use both approaches for different locations. Wired cameras can stay on a UPS, while remote battery cameras cover areas without power.

When battery cameras make more sense

Battery cameras suit sheds, fences and remote corners without wiring. They also suit renters who cannot run cables.

Our What Is a Hybrid Security Camera System? guide explains how wired and battery cameras can work together.

When a UPS is the better spend

Choose a UPS when you already have wired cameras and an NVR. Protecting the recorder often matters more than adding another camera.

If you use Swann gear, our best swann security camera power adapter guide helps you match adapters to the system before you size backup power.

How should you set up and care for a UPS?

Place the UPS where air can flow around it and where you can see status lights. Keep it away from heat and enclosed spaces that trap warmth.

Plug the UPS into a wall outlet, then connect priority gear to battery backup outlets. Test the setup so you know what stays on during a short outage.

Outdoor and garage limits

Outdoor cameras still need indoor protection for the recorder and router. A UPS in a hot garage may age faster than one in a cool room.

Our best power supply for outdoor security camera guide covers adapter choices for outdoor placement.

Simple care habits

Check the LCD or LED status monthly and confirm the battery shows a healthy charge. Replace the battery when runtime falls well below its original figure.

Keep vents clear and avoid stacking gear on top of the UPS. Good airflow helps the battery and electronics last longer.

Verdict: which battery backup should you buy?

Pick the CyberPower CP1500PFCLCD for a full NVR system with multiple cameras. Its capacity, sine wave output and 12 outlets give it the widest use here.

Pick the APC BE600M1 for a compact home office or network shelf. Its 23 minutes at 100W makes short-outage planning clear.

Pick the APC BE425M or CyberPower ST425 for a router and modem only. Both are small, but the APC gives a clearer 15 minute figure at 100W.

Pick GOLDENMATE if you want lithium battery life and pure sine wave output. Pick the pemacom or VOONOA only for vehicle and trailer camera use.

Our top 3 picks at a glance

  1. 1 CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup
    Best for large NVR and camera systems

    CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup

    9.7/10 our score

    See it on Amazon
  2. 2 APC BE600M1 UPS Battery Backup & Surge
    Best for compact home offices

    APC BE600M1 UPS Battery Backup & Surge

    9.6/10 our score

    See it on Amazon
  3. 3 APC BE425M UPS Battery Backup and Surge
    Best for routers and modems only

    APC BE425M UPS Battery Backup and Surge

    9.6/10 our score

    See it on Amazon

Frequently asked questions

What size battery backup does a security camera system need?

Most home systems need 600VA to 1500VA, depending on the NVR, router and camera count. Start by adding the wattage of every device you want to stay on.

Choose a UPS with headroom above that total.

A larger unit also gives more runtime when the load is light.

Can a battery backup power an NVR during an outage?

Yes, if the UPS capacity and runtime fit the NVR, router and cameras. An NVR uses more power than a router alone, so test the total load before you buy.

Put the NVR and network gear on battery backup outlets.

Keep cameras on surge-only outlets only if you accept they may stop.

How long should a UPS keep cameras running?

Runtime depends on the total load, not just the VA rating. A 600VA unit may give about 23 minutes at 100W, while heavier loads drain it faster.

For longer outages, choose a larger UPS or reduce what is plugged into battery outlets.

Prioritize recording and networking first.

Do battery cameras need a UPS?

Battery powered cameras do not need a UPS because they run from their own rechargeable battery. They still need a way to charge, often by USB, solar or a wall adapter.

A UPS is mainly for wired cameras, recorders and network gear that stop when wall power fails.

Should cameras plug into battery backup or surge only outlets?

Plug the most important devices into battery backup outlets. That usually means the NVR, router and modem first, then cameras if capacity allows.

Surge-only outlets protect against spikes but give no runtime.

This split helps the UPS last longer during an outage.