8 Best Solar Panels for Security Cameras (November 2026)
The best solar panels for outdoor security cameras include the EverExceed Solar Panel for Security Camera for two-camera setups, the YCTechCam Solar Panel for Security Camera for adjustable 5V charging, and the SOVMIKU Vicohome 5V Solar Panels for Security for Tapo and Eufy-style setups.
On this page (6 sections)
The best solar panel for security camera use is the EverExceed 5W 2-pack when your cameras are compatible 5V rechargeable models. It gives two cameras separate panels instead of one shared charging point.
It supports Micro USB and USB-C, includes 9.8 ft cables and uses 360-degree adjustable brackets. Those details help when a camera under an eave needs its panel placed on a sunny wall instead.
Compatibility matters more than wattage. Confirm your camera has a rechargeable battery, accepts the panel voltage, uses the right connector and allows charging from another brand accessory.
A matching port shape alone is not enough. Some makers set their own charging rules, so a panel that fits can still refuse to charge.
A solar panel will not turn a plug-in camera into a wireless camera. It only tops up a battery already inside a compatible rechargeable model.
Read what a solar security camera is and how it is used if you are choosing between a built-in solar camera and a separate panel. Built-in models keep panel and camera together as one unit, while a separate panel lets you place the panel in direct sun while the camera stays where it needs to watch.
That freedom suits a shaded porch or north facing wall. It also adds a cable to route and protect, so measure the distance before fixing anything in place.
Our score weighs connector support, power, weather protection, mounting flexibility, pack size and fit. We checked stated specifications and compatibility notes, but we did not test these panels.
Aim each bracket at the strongest midday sun and check the angle again as seasons change. Choose a two-panel pack only when both cameras pass the compatibility checks.
Our picks at a glance
-
1
Best for two-camera setupsEverExceed Solar Panel for Security Camera
9.7/10 our score
See it on Amazon -
2
Best for adjustable 5V chargingYCTechCam Solar Panel for Security Camera
9.6/10 our score
See it on Amazon -
3
Best for Tapo and Eufy-style setupsSOVMIKU Vicohome 5V Solar Panels for Security
9.5/10 our score
See it on Amazon
- 4
Check itCatgod 5W Solar Panel for Security Camera
Best for a single 5W installation - 5
Check itVUEBEE 2W Solar Panel for Security Cameras
Best for lower-power cameras - 6
Check itBONAI 2 Pack 9W Solar Panels- IP65
Best for higher-output 5V devices - 7
Check itFSVGYY 8W Solar Panel for Security Cameras
Best for a single higher-output panel - 8
Check itFUTUREZEN 4W Solar Panel for Security Cameras
Best for compact single-camera setups
The best solar panels for outdoor security cameras
The best solar panels for outdoor security cameras match the camera's connector and charging rules before you compare power output. If you are still choosing a camera, compare solar 4K security cameras for high-resolution options.
EverExceed leads for two-camera coverage, while the other picks fit different output and installation needs.
EverExceed Solar Panel for Security Camera: Best for two-camera setups
- Two 5W panels
- Micro USB and USB-C connectors
- IP65 waterproof
- 360-degree adjustable brackets
- 9.8 ft cables
Two 5W panels cover two compatible rechargeable cameras or give you a spare. The 360-degree brackets and 9.8 ft cables help place each panel where it can receive sunlight.
Pros
- Two panels
- 5W output
- Micro USB and USB-C support
- IP65 waterproof
Cons
- Not compatible with Arlo, Blink, Ring, Eufy or Google Nest cameras
- Not for plug-in cameras without batteries
EverExceed is the most flexible choice for two compatible cameras because the package includes 2 x 5W solar panels. Each panel uses monocrystalline silicon, has a stated maximum voltage of 5V and offers a 360-degree adjustable bracket.
The panels use 9.8 ft charging cables, so you can keep the camera in a shaded corner and move the panel to a sunny fence or wall nearby. IP65 waterproofing and an operating range from -4°F to 122°F fit many outdoor locations.
The package includes two wall mounts, two screw bags, a manual and two USB-C connectors. It supports DC 5V rechargeable battery cameras with Micro USB or USB-C ports.
Set up each panel on its own bracket and aim it for clear direct sun. Tighten the screws firmly, then route each cable without sharp bends so the connector is not pulled at an angle.
The stated maximum efficiency of 20% describes the panel material under suitable light. Real charging still depends on sun strength, panel angle and how much power your camera accepts.
Keep the charging port protected from water during installation and in bad weather. EverExceed advises waterproof measures at that port, and that advice applies to outdoor USB connections in general.
EverExceed specifically excludes Arlo, Blink, Ring, Eufy and Google Nest cameras. It also does not work with doorbell cameras, floodlight cameras or plug-in cameras without batteries.
YCTechCam Solar Panel for Security Camera: Best for adjustable 5V charging
- Two 5W panels
- Micro USB and USB-C support
- IP65 waterproof
- 360-degree wall brackets
- 9.8 ft cables
This 2-pack matches the needs of compatible 5V rechargeable cameras. Its adjustable wall brackets and 9.8 ft cables give you room to find a useful angle.
Pros
- Two panels
- 5W output
- IP65 weather protection
- Adjustable mounting
Cons
- Not compatible with Arlo, Blink, Ring, Eufy, Google Nest or Kasa cameras
- Not for plug-in cameras without batteries
YCTechCam gives you two 5W panels, making it useful when two cameras need separate charging points. The monocrystalline panels output 5V for compatible rechargeable surveillance cameras.
Its 360-degree adjustable wall brackets and 9.8 ft cables give room to set panel angle and distance from the camera. IP65 waterproofing is intended for outdoor weather, including rain and snow.
The panels do not include batteries of their own. They supply power to a rechargeable camera, so the camera still needs its own battery in good condition.
The package includes two panels, two adjustable brackets, two screw bags, USB-C ports and a manual. The camera must have a rechargeable battery and a Micro USB or USB-C connection.
Mount each bracket where the panel can face the sun without a roof edge blocking it. Adjust the vertical angle as well, since a flat panel rarely catches the best light all day.
The 5W rating is a panel output figure, not a promise about charging speed. Your camera decides how much power it draws, and weak sun will reduce output.
YCTechCam is not compatible with Arlo, Blink, Ring, Eufy, Google Nest or Kasa cameras. It also cannot charge a phone, and it is not for plug-in cameras without batteries.
Check the exact camera model before ordering, especially if your camera mentions its own solar accessory. A rechargeable battery and the right port are required, but they are not always sufficient.
SOVMIKU Vicohome 5V Solar Panels for Security: Best for Tapo and Eufy-style setups
- 5W output
- 23% energy conversion rate
- USB-C and Micro USB compatibility
- 9.8 ft cable
- 360-degree adjustable bracket
The SOVMIKU panel combines 5W output with USB-C and Micro USB support for compatible cameras. Its 360-degree mount can be used on walls, fences or stakes into soil.
Pros
- 23% conversion rate
- USB-C and Micro USB support
- 360-degree adjustment
- IP65 weather protection
Cons
- Single-panel pack
- Camera compatibility still depends on the camera's charging protocol
The SOVMIKU Vicohome panel suits compatible cameras that use a 5V USB-C or Micro USB connection. Its 23% energy conversion rate and 5W output place it near the top for a single-panel setup.
The 9.8 ft weather-resistant USB cable helps with placement. The mount adjusts 360 degrees horizontally and 180 degrees vertically for a wall or fence, or you can use a stake into soil.
That stake option suits renters or garden posts where drilling a wall is not wanted. A wall mount suits a corner where the panel needs a firm angle that will not drift.
Its IP65 shell is designed for outdoor use, with an operating range from 32°F to 113°F. The package includes the panel, a 360-degree mount, a Type-C to Micro USB adapter, cable and screws.
The conversion rate does not remove the need for direct sun or for a camera that accepts the panel. Aim the panel toward the sun and recheck the tilt when daylight hours change.
The product data identifies compatibility with Tapo, Eufy and Aosu camera lines, but you should still confirm your exact model before ordering. Keep the USB connection seated fully and protected from driving rain.
Catgod 5W Solar Panel for Security Camera: Best for a single 5W installation
- 5W output
- Micro USB and USB-C ports
- IP65 waterproof
- 360-degree adjustable bracket
- 9.8 ft cable
Catgod gives one compatible rechargeable camera a 5W solar panel, an adjustable bracket and a 9.8 ft cable. The package also includes cable clips and a USB-C port.
Pros
- 5W output
- Micro USB and USB-C ports
- 360-degree bracket
- Single-camera format
Cons
- Single panel
- Compatibility exclusions include Eufy, Arlo, Blink, Google Nest and Kasa
Catgod is a good fit when you need one 5W panel for one compatible rechargeable camera. It has Micro USB and USB-C ports, a 360-degree adjustable bracket and a 9.8 ft cable.
The panel uses monocrystalline silicon and outputs 5V. Its IP65 waterproof design is stated to work from -40°F to 185°F, which gives it the broadest temperature range in this group.
That broad range suits exposed spots that get hot in summer and cold in winter. It does not mean the panel charges well in snow, since charging still needs direct sunlight.
The package includes one panel, one wall bracket, one screw bag, one USB-C port, a manual and 20 cable clips. The panel is made from plastic and weighs 8 ounces.
The cable clips are a small but useful addition for tidy routing. Use them to keep the 9.8 ft cable from sagging across a walkway or pulling on the camera port.
Mount the bracket with the screws, then aim the panel and tighten it in place. Run the cable with gentle curves and clip it at intervals so wind cannot work the connector loose.
Catgod describes compatibility with DC 5V rechargeable battery cameras, including cameras with USB, USB-C or DC 3.5 mm connections. It excludes Eufy, Arlo, Blink, Google Nest and Kasa cameras.
Confirm your camera model first, because the exclusions are clear. This single panel suits one camera, and there is no second panel for another location in the box.
VUEBEE 2W Solar Panel for Security Cameras: Best for lower-power cameras
- Two 2W panels
- USB-C and Micro USB support
- IP65 waterproof
- 360-degree adjustable mounts
- 2.2 m cables
VUEBEE is a practical two-camera choice when 2W output fits the camera's charging needs. Each panel includes a 2.2 m cable and an adjustable mount for outdoor placement.
Pros
- Two panels
- USB-C and Micro USB support
- IP65 waterproof
- 7.2 ft cables
Cons
- Lower output than the 4W, 5W, 8W and 9W options
- Not compatible with Arlo, Blink, Ring, Google Nest or Kasa cameras
VUEBEE is the lower-output two-pack for cameras that can work with 2W charging panels. Both panels support Micro USB and USB-C connections and include 360-degree adjustable mounts.
Each panel has a 2.2 m, or 7.2 ft, cable. That is shorter than the 9.8 ft cables on several 4W and 5W picks, so measure the distance from your planned mount to the camera first.
The shorter cable can still work when the panel mounts just above or beside the camera. It becomes a problem when the sunny spot is across a porch or on the far side of a wall.
The panels use ABS material and have an IP65 waterproof rating. Their stated operating range is -5°F to 120°F, which suits many outdoor locations.
The package includes two solar panels, two adjustable mounts, two cable clip bags, two Micro USB cables and two screw bags. VUEBEE excludes Arlo, Blink, Ring, Google Nest, Kasa and plug-in or non-rechargeable cameras.
Use the clips to hold the cable close to the wall and away from edges. A neat run also makes it easier to spot damage after heavy rain or wind.
Lower wattage suits cameras that need only modest top ups in good sun. It is a poor match for a camera in deep shade that already drains its battery fast.
Mount each panel where it gets direct light for much of the day. If the camera falls behind on charge, check the angle and connector before blaming the panel.
BONAI 2 Pack 9W Solar Panels- IP65: Best for higher-output 5V devices
- Two 9W panels
- 10 ft USB-C cables
- Micro USB adapters
- IP65 waterproof
- ETFE material
BONAI offers the highest stated wattage here, with two 9W panels for compatible DC 5V devices. The kit includes USB-C cables, Micro USB adapters, wall brackets and screw packs.
Pros
- Two 9W panels
- 10 ft cables
- Micro USB and USB-C support
- IP65 protection
Cons
- Higher output does not bypass a camera's charging protocol
- The 9W rating does not mean every camera will draw 9W
BONAI has the highest stated output in this group at 9W per panel, with two panels in the package. It is designed for DC 5V devices and includes USB-C cables plus Micro USB adapters.
The 10 ft cables give slightly more placement room than the 9.8 ft options. Each panel also includes a wall bracket and screw pack, while the ETFE material and IP65 rating are aimed at outdoor use.
BONAI states an operating range from -4°F to 176°F. The package includes two panels, two 10 ft USB-C cables, two USB-C to Micro USB adapters, two wall brackets, two screw packs and two quick start guides.
That wide temperature range suits hot walls and cold corners alike. Charging output will still drop in clouds and shade, whatever the temperature rating says.
The 9W rating does not mean every camera will draw 9W. A camera controls its own charging, and a panel cannot force extra power into a battery that will not accept it.
Fix each bracket, aim the panel at direct sun and connect the correct adapter. Check that the camera shows charging before you finish the cable routing.
FSVGYY 8W Solar Panel for Security Cameras: Best for a single higher-output panel
- 8W output
- USB-C and Micro USB ports
- 360-degree adjustable mount
- Weather-resistant outdoor design
- Mounting accessories
FSVGYY provides one 8W panel for a battery-powered camera that accepts its USB-C or Micro USB connection. The adjustable mount helps you aim the panel for more direct sunlight.
Pros
- 8W output
- USB-C and Micro USB ports
- 360-degree mount
- Single-panel setup
Cons
- Not for plug-in cameras
- A higher wattage does not guarantee compatibility
FSVGYY is the single-panel choice for a compatible battery camera where 8W output is useful. It has USB-C and Micro USB ports, a 360-degree adjustable mount and a 5V DC output.
The outdoor design is described as weather resistant for rain, snow and harsh conditions. Its dimensions are 8 x 2 x 7 in, and the package includes a screwdriver.
That screwdriver covers the mounting job without a separate tool purchase. Drill or drive the fixings for the bracket, then set the panel angle before tightening fully.
FSVGYY is intended for battery-powered cameras only. It cannot power a plug-in camera without a battery, even if the camera uses a similar USB connection.
A higher output can help a camera recover charge after a busy day of motion alerts. It still needs direct sun, so placement matters as much as the headline wattage.
The 360-degree mount lets you swing the panel to follow the sun across the sky. Adjust it in the morning and again in the afternoon if the light angles differ a lot.
Choose it when one camera needs a higher-output panel and the camera's own requirements are confirmed. A higher wattage can help charging capacity, but it does not prove a better fit for every camera.
Keep the cable clear of sharp edges and check the mount after storms. A panel that has slipped out of angle will charge poorly even in bright weather.
FUTUREZEN 4W Solar Panel for Security Cameras: Best for compact single-camera setups
- 4W output
- USB-C and USB support
- IP66 waterproof
- 360-degree adjustable bracket
- 9.8 ft cable
FUTUREZEN is a compact single-panel option for compatible 5V rechargeable cameras. Its IP66 rating, 360-degree bracket and 9.8 ft cable suit exposed outdoor mounting.
Pros
- IP66 waterproof
- 4W output
- 9.8 ft cable
- 360-degree bracket
Cons
- Single panel
- Not compatible with Arlo, Blink, Ring, Google Nest or Kasa cameras
FUTUREZEN is the compact single-panel option with 4W output, USB-C and Micro USB support, a 9.8 ft cable and a 360-degree adjustable bracket.
Its IP66 waterproof rating is stronger than the IP65 rating on most other picks here. The stated operating range is -5°F to 120°F, and the panel uses ASA material.
That higher rating suits a panel mounted in the open with no shelter from rain. It still depends on a sealed connection at the camera port, so protect that plug in wet weather.
The package includes one 4W panel, one adjustable wall mount and one screw bag. Installation requires securing the bracket and connecting the cable to a compatible 5V rechargeable camera.
Drill three holes for the bracket, fix it to the wall and aim the panel toward direct sun. A tilt near 45 degrees is a sensible starting point for catching strong daylight.
The 9.8 ft cable gives room to separate the panel from a camera under an eave. Route it without tight bends and keep tension off the connector.
FUTUREZEN excludes Arlo, Blink, Ring, Google Nest and Kasa cameras, along with doorbells and plug-in cameras without batteries. It fits buyers who want one panel with a higher weather rating and a moderate 4W output.
Wipe the panel clean when dust builds up and check the bracket after severe weather. Confirm the exact camera model first, since exclusions apply even when the port shape matches.
How do you match a solar panel to a security camera?
Match the panel to the camera's battery type, connector, voltage and charging protocol. A panel with the right USB shape can still fail to charge if the camera does not accept that accessory.
Start with the camera manual or support page. Confirm whether it uses Micro USB, USB-C, USB or another connector, then check that the camera is a rechargeable battery model.
For brand-specific systems, use a purpose-built accessory when the camera maker requires one. See our guides to the best solar panels for Ring security cameras, best solar panels for Arlo security cameras and best solar panels for Google Nest cameras.
A panel made for a rechargeable camera will not replace a normal power cable for a plug-in model. Read what a plug-in security camera does before choosing an outdoor power accessory.
Is more wattage better for an outdoor security camera?
More wattage gives a panel a higher stated output, but it does not guarantee faster charging. The camera controls how much power it accepts, and the panel still needs direct sunlight to produce its rated output.
Think of wattage as a ceiling rather than a promise. A 9W panel in shade can deliver less useful power than a 4W panel aimed at clear midday sun.
The 2W VUEBEE suits lower-output needs, while the 4W FUTUREZEN and 5W options provide a middle range. The 8W FSVGYY and 9W BONAI panels make sense when the camera accepts that setup and the mount gets useful sunlight.
A lower-output panel may be enough for a camera with light motion traffic. A camera recording often, sending live video or using bright lights may drain its battery faster and need more input.
That drain depends on your settings as much as the hardware. Shorter clips, lower resolution and fewer live views all reduce battery use between charging periods.
Use wattage as one part of the decision. Connector type, camera protocol and sunlight exposure matter just as much.
Protocol is the gatekeeper in this group. If a camera blocks third party solar accessories, no wattage rating will make the panel charge it.
For one camera in good sun, a 4W or 5W panel is often the sensible middle ground. For two cameras, a two-pack spreads cost and gives each camera its own charging point.
How should you install and care for a camera solar panel?
Install the panel where roofs, walls, trees and trim do not block direct sunlight for much of the day. Use the adjustable bracket to aim the panel, then route the cable without sharp bends or tension.
Walk the site at different times of day before you drill anything. A spot that looks sunny at noon can sit in shade by mid afternoon when a wall cuts in.
Mount the bracket first and hold the panel in place to test the angle. Aim for direct sun across the middle of the day, since that is when charging counts most.
Keep the camera charging port protected from water. EverExceed specifically advises waterproof measures at the camera port, and that advice applies broadly to outdoor USB connections.
Push the connector in fully and check that it does not wobble. Route the cable along a wall or fence and clip it at intervals.
Clean dirt from the panel when needed and check the cable after severe weather. If the battery still falls, inspect shade, connector fit, charging permissions and battery condition before assuming the panel is defective.
Re-aim the panel when the sun path shifts and trim back growth that starts to cast shade over it. Seasonal change can quietly move a morning sun spot into shade.
If your camera needs stored energy for cloudy periods, compare these panels with our guide to the best solar panels with batteries for security cameras. For a USB-C camera, see the best USB-C solar panels for security cameras.
More guides on this topic
- Best Solar Chargers for SimpliSafe Outdoor Cameras
That guide is worth a look if your camera is a SimpliSafe outdoor model. It covers chargers matched to that camera line instead of general solar panels.
General panels like the ones in this post still need a protocol check. A brand specific charger can be the safer route when the camera maker sets its own rules.
Use the guide to compare connector fit and mounting before you order. It can save you a return when a generic panel would not charge your camera.
Which solar panel should you choose?
Choose EverExceed for two compatible cameras, YCTechCam for a similar two-panel 5W setup, or SOVMIKU for a single 5W panel with a stated 23% conversion rate. Catgod is the straightforward one-panel 5W choice.
Pick VUEBEE when 2W output and a two-pack fit your camera. Choose BONAI or FSVGYY when your camera accepts a higher-output panel, and FUTUREZEN when IP66 weather protection and a compact 4W single-panel setup matter most.
None of them removes the compatibility check. The same port shape does not guarantee that a camera will accept a third party panel.
For a corner camera under an eave, a 9.8 ft cable is a real advantage. It lets the panel sit on a sunny wall while the camera stays in its shaded viewing spot.
If you own two cameras, a two-pack gives each one its own panel and bracket. That avoids long cable runs between cameras and keeps each panel aimed where its light is best.
If you own one camera, a single panel is simpler and cheaper. Higher wattage suits busy cameras in good sun, while lower wattage suits light use.
Before you order, verify the exact camera model, battery type, connector, voltage and charging protocol. Once installed, watch the battery level for a few sunny days and re-aim the panel if it still falls.
Our top 3 picks at a glance
-
1
Best for two-camera setups
EverExceed Solar Panel for Security Camera
9.7/10 our score
See it on Amazon -
2
Best for adjustable 5V charging
YCTechCam Solar Panel for Security Camera
9.6/10 our score
See it on Amazon -
3
Best for Tapo and Eufy-style setups
SOVMIKU Vicohome 5V Solar Panels for Security
9.5/10 our score
See it on Amazon
Frequently asked questions
What is the best solar panel for security camera use?
The EverExceed Solar Panel for Security Camera is the strongest overall pick here because it provides two 5W panels, Micro USB and USB-C support, IP65 waterproofing, 360-degree brackets and 9.8 ft cables.
It only suits compatible 5V rechargeable cameras, so confirm the camera model and charging protocol first.
Can a solar panel charge any outdoor security camera?
No. These panels are designed for rechargeable battery cameras, and compatibility depends on the camera's connector, voltage and charging protocol.
A matching USB-C or Micro USB port alone does not guarantee charging.
Plug-in cameras without batteries generally need a different power setup.
Is a 9W solar panel better than a 5W panel?
A 9W panel has a higher stated output than a 5W panel, which may give more charging capacity in suitable sunlight. It does not force a camera to accept more power or solve an incompatible charging protocol.
Choose wattage only after confirming the camera's requirements.
Where should you mount a security camera solar panel?
Mount the panel where it receives clear, direct sunlight for much of the day, then use its adjustable bracket to aim it toward the sun. Keep the cable long enough to reach the camera without strain.
Protect the camera's charging port from water and check the connection after installation.
